FibreFENCE Gate

The FibreFENCE Gate is a pedestrian and vehicular gate system built from GFRP (Glass Fiber Reinforced Polymer) pultruded profiles that form a structural supporting frame, infilled with a lightweight GFRP mesh panel. Steel hardware components — including hinges, latches, and bolts — complete the assembly. Gates are available in single-leaf or double-leaf configurations, with standard heights up to 2.5 meters and opening widths up to 12 meters. The system is CE marked and compliant with UNIEN 13241 Class 5 wind resistance standards. Certified documentation covers radio transparency, ICAO frangibility, CATAS UV-ray resistance, and ASTM G154-06 artificial weathering testing.

Because the entire GFRP frame carries significantly lower mass than an equivalent steel gate, wide openings up to 12 meters require no heavy support columns or complex counterbalance structures. The ICAO-compliant frangibility of the material also allows crash gate configurations of any size — emergency vehicles can break through a closed gate under impact without requiring it to be manually opened. The system is virtually maintenance-free, with no corrosion, no surface coating requirements, and no susceptibility to UV degradation over its service life.

FibreFENCE Gate serves as the direct access point within complete FibreFENCE perimeter systems at airports, industrial facilities, and secured infrastructure sites. Pedestrian gates control staff entry along airside boundaries, while vehicular versions manage ground service vehicle access across apron perimeters and runway-adjacent zones. Crash gate versions are installed specifically at emergency access points where rescue vehicle response time is critical.

Leader Infra supplies this CE-marked, ICAO-compliant gate system as a complete access solution for perimeter projects — combining certified radio transparency, frangibility, and wide-span capability within a single lightweight GFRP structure that pairs directly with any FibreFENCE fencing installation.

FAQ — What is the maximum single opening width available for the FibreFENCE Gate? The system supports apertures up to 12 meters in double-leaf configuration. Because GFRP profiles are substantially lighter than steel, these wide spans are achievable without the heavy supporting columns or structural foundations that equivalent steel gate systems would require at the same opening width.